All I needed to do was get a few stone blocks to level my AC device out
For a long time the cooling in my home was just sub par. I would turn down the control component as well as nothing would happen. I changed the air filter, cleaned the inside of the cooling system as well as hoped for frigid air. The most I would get is tepid to cool air blowing around the house. That was the issue, the actual air coming out of the vents was not frigid enough. I did a lot of googling about the problem. All that did was scare me though. I thought I might have a damper issue, wiring concern or need a brand current cooling system. Thankfully I took a few days as well as just thought about what could be going wrong. Rather than jump on the horn as well as have an a/c business come over, I used my brain. I started looking over my outdoor air compressor as well as I realized that it was at an angle. It was not totally on its side, just slightly off centered. I then looked up if that could affect the indoor air handler cooling, then yes, when an outdoor component is tilted, all the coolant pushes to 1 side of the machine. Then when the AC operates, no coolant is going over the air. So you then get tepid air inside of the home. All I needed to do was get a few stone blocks to level my AC device out. It was almost immediate where I had frigid air once again. Thankfully I did not have an AC business come in as well as repair this small issue. I figured it out on my own.